The Series 2 Maple Armor 520Hz Low Frequency Horn, and Horn-Strobe appliances are a comprehensive family of audible and visual signaling appliances, combining contemporary design with energy-efficient performance.
They are engineered to operate in conventional and addressable operation modes, offering unparalleled versatility for a wide range of applications. In addressable mode, each device is equipped with intelligent communication capabilities, allowing it to report its precise location and status directly to the control panel.
The appliances provide a wide array of field-configurable visual settings. The light intensity (candela) can be adjusted on-site to 15, 30, 75, 110, 140, or 177 cd. Allsettings can be conveniently configured via a handheld programmer or directly through the control panel.
The strobe appliances produce a flash rate of one flash per second over the regulated voltage range. The temporaltone generated by the horn portion is designed inaccordance with ANSI and NFPA 72 for standard emergency evacuation signaling requirements.
All Series 2 signaling appliances are designed to be installed on the same installation base as previous Maple Armor appliances.
Features
- Modern design
- Conventional Mode
- Addressable Mode
- Code-compliant 520 Hz output
- High-intensity LED light source
- Approved for ceiling and wall mounting
- Easy installation
- Fits on North American single-gang, 3.5" octagon, and 4" square electrical boxes
- Designed with energy efficiency
• More devices per circuit
• Longer circuit wire runs
• Lower wire gauge
• Less installation cost
- Six selectable strobe intensity
• 15, 30, 75, 110, 140, or 177 cd
- Two selectable sounder volumes
• High and Low
- Six Selectable horn patterns
• Temporal 3
• Temporal 4
• Steady
• March time 20 bpm
• March time 60 bpm
• March time 120 bpm
- Available in White and Red color finish
- Compatible with all Maple Armor control panels
Specifications



Operation
Two-Wire operation:
This enables both the horn and strobe to be wired and activated on the same NAC circuit in both conventional and addressable modes. This configuration allows the horn to be silenced while the strobe continues to flash. The horn continues to sound until it is silenced, while the strobe keeps flashing until it is reset.
Synchronization Sources:
• Maple Armor FW2105 and FW2107 Fire Alarm Control Panels
• NAC Booster FW131
• Sync Module FW951
Installation
All Series 2 strobes, horns, and horn-strobes mount to universal appliance bases, which provide easy installation, wiring, and testing before the appliance is installed. The circular shape design requires minimal leveling.

The bases can be mounted to any standard North American single-gang, octagon, 4-inch square electricalbox. Assemble the appliance device by aligning it onto the base and twisting it clockwise.
Wiring
Field wiring is to be completed using the terminal screws provided on the universal installation base, and it can accommodate #18 to #12 AWG (0.82 mm2 to 3.31 mm2).

Ordering Information

Get in touch with us
Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
Email
Telephone
+86 755 2678 7499
Recommended
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.