Characteristics And Benefits:
Compatible with all the conventional fire alarm control panel
Unpolarized wire input
Wide range of operating voltages
Unique optical sensing chamber and High precision electronic thermistor
Built in microprocessor intelligent software
Two LEDs blink standby, provide 360° visibility Insect-resistant screening
Twist-on mounting base with tamper lock
Drift compensation and smoothing algorithms
Remote Indicator LED can be connected
Product Overview:
The detector is a combined smoke and heat detector with photoelectronic sensor and heat thermistor together. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every 3~5 seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The detector can be reset only by a momentary power interruption.
Specifications
Operating Temperature Range | -10°C to 50°C |
Operating Humidity Range | 10% to 93% Relative Humidity, Noncondensing |
Latching Alarm | Reset by momentary power interruption |
System Voltage (nominal) | 24 VDC (9V~ 28VDC) |
Standby Current | 60 μA @ 24VDC |
Alarm Current | 30 mA @ 24VDC |
Fixed Temperature Rating | 57°C (135°F) |
Rate Of Rise Detection | Responds to greater than 15°F/min |
Dimensions | 103x103x55(ncluding mounting base)mm |
Weight | 155 g |
Get in touch with us
Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
Email
Telephone
+86 755 2678 7499
Recommended
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.